Magnetic Stirred Reactor: How is the pressure test conducted before the magnetic stirred reactor leaves the factory?

How is a pneumatic pressure test conducted on a magnetic stirrer reactor before it leaves the factory? Some quality checks must be performed before shipment. They can only leave the factory after passing inspection. This is a necessary step for magnetic stirring reactors. Before a magnetic stirring reactor leaves the factory, it must undergo a pressure test to verify both the performance and safety of the high-pressure reactor. Let’s take a closer look at the detailed process.

How is a pneumatic pressure test conducted on a magnetic stirrer reactor before it leaves the factory?

The gas used in the pressure test of the magnetic stirrer reactor is dry, clean air, nitrogen, or other inert gases.

During the experiment, safety measures must be implemented, and on-site supervision must be conducted by the safety management department of the experimental unit.

The air pressure test procedure for the magnetic stirrer reactor is as follows:

During the experiment, the pressure should be gradually increased to the tolerable pressure level. 10%, and after maintaining the pressure for 5 minutes, check all joints for leaks.

Magnetic Stirred Reactor When there is no leakage, the pressure continuously increases to the conventional experimental pressure. 50%.

There were no abnormalities observed during the above process. Subsequently, according to the standard experimental pressure... Gradually increase the pressure by 10% until the specified value is reached, and maintain this pressure for 10 minutes. At all times, check for any abnormalities and ensure that the internal pressure remains stable. If changes indicate a leak in the high-pressure reactor, it should be inspected and addressed.

Properly maintain the magnetic stirrer reactor. The factory inspection is a responsibility and commitment to our customers. For more information about the reactor, please stay tuned with us. If you’re interested in our products, feel free to come and make your purchase.

Weihai Automatic Control Reactor Co., Ltd. specializes in the manufacture of magnetic stirrer reactors and reaction vessels. Autoclave 、 Stainless Steel Reactor Reactor manufacturer—welcome to contact us for cooperation!