Reactor: Introduction to the Reactor

Reaction vessel It is a comprehensive reaction vessel. The structure, functionality, and accessory configurations of the reaction vessel are designed according to the reaction conditions. Starting from the feed inlet... —Reaction—The discharge process can be carried out with a high degree of automation, allowing pre-set reaction steps to be completed automatically. During the reaction, critical parameters such as temperature, pressure, mechanical controls (e.g., stirring, air blowing), and the concentrations of reactants and products are strictly monitored. The typical structure consists of a reactor vessel, a drive mechanism, a stirring device, a heating system, a cooling system, and a sealing device. Supporting auxiliary equipment includes distillation columns, condensers, water separators, collection tanks, filters, and other related components.

The reactor consists of a vessel body, a vessel lid, a jacket, a stirrer, a drive unit, a shaft sealing device, and a support frame. When the stirrer has a large height-to-diameter ratio, multi-layer impeller blades can be used, or the configuration can be customized according to user requirements. A jacket is provided on the outer surface of the kettle wall, or a heat-exchange surface is installed inside the vessel; heat exchange can also be achieved through external circulation. The support base includes either a support-type or ear-type support base. If the rotational speed exceeds If the speed is 160 rpm, a gear reducer should be used. The number of holes, specifications, or other requirements can be designed and manufactured according to user needs.

1. Reaction vessel Packaging is typically used for sealing under atmospheric or low-pressure conditions, where the pressure is usually less than... 2 kg.

2. Under normal medium-pressure or vacuum conditions, mechanical seals will be used, and the typical pressure will be either negative pressure or 4 kg.

3. Electromagnetic seals will be used under high-pressure or highly volatile media conditions. Typically, the pressure exceeds 14 kg. With the exception of magnetic seals that use water cooling, other seal types can cause the cooling water jacket to rise by more than 120 degrees Celsius.

Weihai Automatic Control Reactor Co., Ltd. is a manufacturer of reactors. We welcome you to contact us for cooperation!