Reactor: How to Clean a High-Pressure Reactor

Reaction vessel How to clean? Have you cleaned it after purchasing or using it? Reaction vessel ？ Probably not many friends would clean it up! Today, our Reaction vessel The manufacturer will tell you how to clean the autoclave—let’s take a look!

Manually in Reaction vessel Perform manual cleaning in the middle: Low cost is its advantage, but entering... Reaction vessel Previously, the area needs to be ventilated for several hours, and at any point during the removal process, the oxygen concentration in the kettle must be monitored, which could pose a risk of hypoxia. Meanwhile, manual scraping can remove residual traces; however, in addition to thoroughly cleaning the surface, it also causes the inner walls of the autoclave to become slippery, which objectively facilitates further adhesion of residues. Personnel entering the autoclave for cleaning can also pose hygiene risks to the product. Generally, the time required to clean an autoclave ranges from about half a day to one full day.

Manual cleaning Reaction vessel It also drains human physical strength, and since oxygen deprivation can occur at any time, multiple workers need to be rotated during the cleaning process. Reaction vessel Not only can it improve cleaning efficiency, but it can also effectively conserve resources.

Control the stirring speed of the reactor. The stirring drive motor is a DC servo motor. Its excitation coil voltage is supplied by a full-wave rectifier, and the armature voltage is provided by a rectifier circuit consisting of a bridge rectifier, which adjusts the firing angle of the thyristor rectifier elements. In other words, the purpose of stepless rotational stirring is achieved by adjusting the magnitude of the corresponding motion based on the output pulses from the trigger circuit. The upper part of the isolation sleeve is equipped with an inductive speed-measuring element. As the mixer rotates, the sensing element generates an induced electromotive force. The potential value corresponds to the stirring speed. The potential is transmitted to the tachometer, which displays the mixer’s stirring speed.

Now everyone knows how to clean. Reaction vessel ！ After use, the autoclave must be properly cleaned and maintained.

Weihai Automatic Control Reactor Co., Ltd. is a manufacturer of reactors. We welcome you to contact us for cooperation!