Laboratory Reactor: What is the correct method for storing a laboratory reactor?

Laboratory Reactor When not in use temporarily, it needs to be properly stored to ensure there will be no issues when you use it next time.

Based on the practical experience of senior operations and management personnel, the following points have been summarized for your reference:

1. During storage, both the inner and outer walls of the laboratory reactor vessel must be cleaned with warm water. The reactor body should be regularly wiped down, ensuring that the exterior remains clean and the interior is shiny, thereby enhancing its durability.

2. The custom-made high-pressure reactor should have its electric heating medium oil replaced every six months when the reactor is in use.

3. If the lubricant in the reducer is found to be insufficient, it should be replenished immediately.

4. Inspect the safety valve, pressure gauge, thermometer, distillation port, electric heater, electrical instruments, and other components on the jacket of the reactor and the pot lid. If any issues are found, they should be replaced or repaired promptly.

Select Laboratory Reactor When choosing a cleaning method for the inner wall, several factors should be taken into account. :

First, it is essential to understand the types of pollutants present in the enterprise and to select an appropriate cleaning method tailored to each type. It’s important to note that solvent-based cleaning—including solvent vapor degreasing, ultrasonic cleaning, and water-based detergents—is commonly used to remove contaminants such as oils and waxes. Chemical industrial cleaning methods, including alkali solutions and acid etching, are employed to tackle certain major contaminants—such as paint, carbon deposits, or other stubborn residues that cannot be effectively removed by solvent-based or purely chemical cleaning alone.

Second, it is important to understand how the choice of washing method affects the performance and usability of laboratory reactors.

Third, it’s important to understand the practicality of the cleaning method you’ve chosen—for example, if the kettle body is too large, it can’t be placed into an ultrasonic cleaning tank for cleaning.

Weihai Automatic Control Reactor Co., Ltd. is a manufacturer. Magnetic Stirred Reactor 、 Hydrogenation Reactor 、 Laboratory Reactor 、 Stainless Steel Reactor of the Reaction vessel Manufacturers, you're welcome to come and discuss cooperation!